1. Home
  2. >>
  3. Latest
  4. >>
  5. How to install a bug in the house

How to install a bug in the house



How to install a bug in the house


For a few days now, you have begun to notice strange disappearances from your fridge and, for this reason, you have the impression that one of your cohabitants is not respecting his diet as it should! Intent on confirming (or disproving) your suspicions, you have decided to place one bug in the kitchen, so as to _beak_ the petty thief of the last hour. The problem, though, is that you don’t have a clue where to start, because you’ve never done anything like this before.

How do you say? Have I definitely hit the point? Very good! In this case, know that you are in the right place, at the right time: in fact, I will explain below how to install a bug in the house, providing you with useful information on the types of bugs currently available on the market and also giving you some advice on the most appropriate place to place it.

Before going on, however, I would like to make you a clarification that I consider necessary: ​​use the bug only in full respect of the people who populate your home, and not to obtain information on things or situations that you should not know. In some cases, monitoring people’s activities, without warning them, could even be punishable by law: use correctly the information that I am about to provide you below and know that I do not take any responsibility in this regard. Then don’t say I didn’t warn you!

Index

Types of bugs

Before even getting to the heart of the matter and explaining to you, in practice, how to install a bug in the house, I think it is appropriate to provide you with an overview of the apparatuses of this type, available on the market.

To begin with, bugs can be divided into at least 3 different categories, based on the mode of transmission of the acquired data.

The size of a bug, on the other hand, depend on the purpose with which they were designed: the bedbugs, for example, they are extremely small devices (usually measuring a few mm) designed for environmental wiretapping, capable of transmitting low-resolution audio and / or video; the micro-camerasInstead, they are real mini-lenses, slightly larger than bedbugs, capable of capturing and sending video signals.

There are also real ones on the market bugs “hidden” in commonly used objects, such as puppets, battery chargers, pens, paintings, ashtrays, USB sticks and so on: generally, these are audio acquisition devices, which transmit the received signal via RF, or equipped with small internal memories.

In addition to the transmission / acquisition mode and format, here are other parameters to consider when purchasing a bug.

In short, as you have surely understood, there are bugs for all uses and needs. You’re asking me about them price? Well, the matter is not very different, there are devices of this type for all budgets: bugs “hidden” in objects and enabled to record contents in memory, generally, have a cost of a few tens of euros.

With regard to the most performing acquisition devices (e.g. GSM transmission and small size), on the other hand, the price can also go up to € 150-200. Finally, professional bedbugs can cost too much over 1000 €, based on the technical characteristics that distinguish them.

The bugs can be purchased at stores specializing in items of this type, or on the Internet. Below I propose some available online which, in my opinion, have a good quality / price ratio.

How to install a bug in the house

Once you have identified and obtained the model that best suits your needs, it is time to get to the heart of this guide and understand, in practice, how to install a bug in the house, to get the best possible result.

To begin with, carefully analyze the type of bug you have chosen: if you have opted for a very small one bed bug, for audio interception, be sure to place it in a hidden and hardly visible point, but, at the same time, not particularly “closed”.

For example, you could fix the bug inside recesses of tables, chairs And furnishing, in the tiny empty spaces of the room (for example the corners of the walls or the corner protectors) or, again, in correspondence of particularly “dense” points of objects (such as bookshelves or flower boxes).

If the bug needs external power, be sure to place it near a power outlet, or insert the small battery supplied in a hardly visible place (which, in this case, can also be completely closed); pay close attention to the visibility of the output cables and, where possible, cover them with some insulating adhesive tape, which is easily confused with the color of the surrounding environment.

As regards, however, the bugs equipped with micro camera, make sure that the chosen position allows you to see the area of ​​your interest and, if activation via a motion sensor is envisaged, check that the latter is oriented towards the entry point that is generally more “frequented” in the room.

If the bug you have chosen is based on the radio frequency transmission, take care to choose a place well away from other sources of electromagnetic waves, in order to avoid interference or problems during signal reception.

If I had opted for a much simpler one bug “integrated” in an object of common use, the question is slightly different: it is essential, in this case, to position the object in a point consistent with its format and in an environment where it can easily hide.

For example, if you bought a spy pen, you could place it on a desk or in a pen holder; if you have chosen an ashtray, instead, place it on an ornamental table; again, if you have chosen to use a puppet-shaped bug, place it where there are other elements of that type (eg on a sofa, an armchair or a bed).

Also in this case, if the device you have chosen is designed to transmit signals over radio frequencies, avoid placing it near electronic material that could interfere with it.

I recommend you, regardless of the installation technique you choose, not to become an electrician (especially if the bug / bug you have chosen must necessarily be connected to a plug or a power switch): if you have no knowledge on the subject , do not hesitate to contact specialized personnel, who can do the work on your behalf, in order to avoid damaging yourself, the electronic devices or the people around you.

Once the bug has been properly positioned and connected, if provided, to the external power source, turn it on and, if necessary, combine it with its remote receiver or configure the GSM transmitter, following the instructions provided on the user manual of the same. If you have opted for a Wi-Fi room, download its configuration app to connect it to your home network.

Finally, check that the quality of the audio / video signal detected by the location you have chosen is good enough and, if not, reposition the capture device.

How to consult a bug

Now that you have managed to configure and make the bug work, would you like to understand how to access the material being acquired or recorded? Unfortunately I cannot give you specific instructions on this, as each bug has a consultation technique decided by its respective manufacturer.

What I can do, however, is to provide you with some general information, to be applied based on the type of bug in your possession.