It is a new device and you know this, but you have decided to customize it, and you also know that to install a custom ROM or a MOD you have to Root it first. Now you are looking for a guide to do the root Huawei P20 Lite with Magisk, well then keep reading the tutorial. Huawei recently unveiled a number of devices in the new P20 series and these are the first Huawei phones to be released with the notch. In this guide, we will tell you how you can easily do the root Huawei P20 Lite with Magisk. This guide will work with templates ANE-LX1 , ANE-L01 And ANE-L21.
Huawei is one of the fastest growing Android manufacturers at the moment. We all know how the Chinese manufacturer’s entry into the United States has unfortunately been shot down (by other manufacturers?), Huawei has no plans to stop for it. They unveiled device after device with many new features, both hardware and software. The latest addition to this line-up is the Huawei P20 series. Read below to know how to root Huawei P20 Lite with Magisk.
Huawei P20 Lite is one of the devices of the Huawei P20 family. Huawei P20 Lite is powered by Octa-core HiSilicon Kirin 659 processor. A 4GB RAM and Mali-T830 MP2 graphics processor ensure that the phone runs smoothly even with applications that require more memory, without showing any signs of lag. .
The phone comes with 64GB of internal storage which can be expanded to 256GB via a microSD card. The phone is equipped with a large 3000mAh battery to support its 5.8 inch IPS LCD display with a resolution of 1080 x 2280 at 432 PPI. The screen is also protected by a resistant, scratch-resistant glass.
Prerequisites
- The root of your Huawei P20 Lite requires unlocked bootloader. You can follow this guide: Guide to Unlock Huawei P20 Lite Bootloader It is for the P20 but the procedure is identical.
- TWRP installation is very complex. Be sure to make a full backup of your device before proceeding. Guide: Guide to backup Android device without root
- Make sure you have enough battery on your device.
- Make sure you have ADB and Fastboot installed on your PC.
Supported Models
- ANE-LX1
- ANE-L01
- ANE-L21
Downloads required
- Huawei P20 Lite Patched ramdisk image: patched_ramdisk.img
How to root Huawei P20 Lite with Magisk
- You must have unlocked the Huawei P20 Lite Bootloader.
- Boot your Huawei P20 Lite in Fastboot mode:
- Turn the phone off.
- Connect the USB cable to the phone.
- Press and hold the Volume Down button, connect the other end of the USB cable to the PC.
- The device will now be in Fastboot mode.
- Download patched_ramdisk.img from the download section above.
- Copy the file to the folder where ADB and Fastboot are installed on your PC. This should probably be the “’C: adb’ folder. The ADB and Fastboot folder can always be found in the ‘C: ‘.
- Open a Command Prompt window inside the ADB and Fastboot folder: Keep holding down the Shift key + Right click > Select Open command window here.
- Run the command below to see if your device is properly connected in Fastboot Mode: fastboot devices
If your device is connected correctly, you will see a message along with your device ID.
- Now, run the following command to root Huawei P20 Lite: fastboot flash ramdisk patched_ramdisk.img
- Once the installation process is complete, you can reboot your device by running the following command: fastboot reboot
Done! Well done. You have now successfully performed the root Huawei P20 Lite with Magisk.