How to restore Moto G4 and Moto G4 Plus firmware. Do you have a Moto G4 or Moto G4 Plus? Are you facing the Bootloop problem? Are you looking for a method to solve the problem? Don’t you like the new custom rom you just installed? You are in the right place.

In this post, you will find the universal solution for all problems. It will also be useful for those who are looking for the official firmware for the Moto G4 and Moto G4 Plus, they can download it from below. Installing the official firmware is the best solution for all the problems you face while using a smartphone running custom ROMs.

Keep in mind that after installing the Moto G4 and Moto G4 Plus firmware you will lose root permissions, and if your device is stuck in bootloop or your device is bricked, installing the official firmware solves both problems.

This guide is only for the Moto G4 and Moto G4 Plus. In case you try this method on another device, you may lock the device permanently. The battery must be at least 60% charged! The device battery must be charged to avoid accidental shutdowns while installing firmware on the Moto G4 and Moto G4 Plus.

So, make sure you charge your device before starting the installation process.

DOWNLOAD

Download Moto G4 Plus flash file:

  • Download Stock ROM for Moto G4 Plus XT1641-XT1643 – Download

Moto G4 Flash File Download:

  • Download Flashstock.zip file – Download
  • Download Stock Firmware of Moto G 4th gen – Download
  • Download Stock ROM for Moto G4 XT1622 ATHENE – Download

OTHER DOWNLOADS

  • Download ADB and fastboot driver for windows
  • Download USB Drivers for Motorola

How to restore Moto G4 and Moto G4 Plus firmware

Phase 1: Download Motorola USB drivers along with ADB and Fastboot drivers. Perform both installations.

Phase 2: Download the official firmware for the device and extract it to the ADB installation directory / folder.

Phase 3: Now in the adb and fastboot folder, hold down the Shift + right mouse key to open the command window.

Step 4: Reboot the device in Bootloader mode, Turn off the device by holding Power + Volume Down.

Step 5: Run the flashstock.bat script to install the Stock firmware.

Step 6: That’s it, wait for the trial come completed.

This is the way it is possible install stock firmware on Moto G4 and Moto G4 Plus.

Share.

Comments are closed.